Anchoring

Once you have created your EZ Dock, you will need to select an anchoring system to work with your existing piling or with your new installation. Our wide-variety of anchoring components can accommodate most water conditions and bottoms (deep, shallow, rough, muddy or sandy), and are simple to install. EZ Dock anchoring products are made from long-lasting, durable materials that can accommodate standard or heavy-duty demands.

 

 

Pipe Augers

Part#100255 or 100355

 

Auger with bolt and nut allows for drilling and setting pipe in lake, river or ocean bottoms. Pipe sold separately.

 

Floating Dock Adaptor Hinge Kit

Part#100750 or 100750ss(stainless)

 

Reversible hinge allows you to bolt EZ Port PWC lifts or EZ Dock sections to other types of floating docks.

 

Stiff-Arm Heavy Duty

Part#800099

 

Anchor to a shoreline abutment or to a shoreline post with our heavy-duty stiff-arm. Light-duty stiff-arm bracket also available.

 

Heavy-Duty Pipe Bracket

Part#210250 or 210350

 

Heavy-duty polyethylene pipe bracket allows docks to adjust to changing water levels.

 

Standard - Duty Pipe Bracket

Part# 135250 or 135350

 

Standard-duty bracket provides ample anchoring for EZ Port PWC lifts, or for smaller docks in moderate conditions.

 

Pipe Stand - Off Bracket

Part#1051000

 

Polyurethane bracket attaches top of pipe to stationary docks. Fits pipe from 2.5" (6cm) to 3.5" (9cm) O.D.

 

Deadweight Bracket (Large)

Part#210350 and 100725p

 

Add a deadweight insert to our heavy-duty polyethylene pipe bracket to anchor docks in deep water or over rocky bottoms.

 

Deadweight Winch Insert

Part# 210350 and 100730

 

Deadweight insert and cable winch added to our polyethylene pipe bracket allows easy dock adjustment for water fluctuations. Cable sold separately.

 

Deadweight Bracket (Small)

Part#100740 or 100740ss(stainless)

 

For light-duty anchoring with chain and/or to attach 4" x 4" (10cm x 10cm) railing or mooring posts. Chain sold separately.

 

Deadweight Stiff Arm Combo Bracket

Part#100700,800095-20

 

This combination bracket can be used with both EZ DOCK's deadweight or stiff arm anchoring system.

Adjustable Piling Bracket

Part#300800

 

Heavy-duty polyethylene bracket allows lateral position adjustments to attach to piles up to 18"in diameter.

Piling Bracket and Hoop

Part#100800,100812
(shown)

 

Mainframe piling bracket is predrilled for hoops from 4" (10cm) to 24" (61cm) wide. Includes connectors with nuts. Hoops sold separately.

 

1600 East Busch Boulevard

Tampa, Florida 33612

813.917.0331

 

© Copyright 2010 – 2014 EZ Dock Florida. All rights reserved.